\documentclass{CME2024_fullpaper}

\begin{document}

%------------------------------------------------------------
% title
\begin{center}
  \fontsize{12}{16}{\bf
     Here, type the title of your paper, Capitalize first letter
  }
\end{center}


%------------------------------------------------------------
% authors
\begin{center}
\normalsize{
  \bf{
    A. Author$^a$,
    B. Author$^b$,
    C. Author$^{a,c}$ $^*$,
    }
}
\end{center}

%------------------------------------------------------------
% affiliations

\begin{center}

  \begin{tabular}{c}
    $^a$ Faculty of Mechanical Engineering,
    University of Technology,              
    Address, Postcode City, Country        \\
  \end{tabular}

  \begin{tabular}{c}
    $^b$ Institute for Mechatronics,
    University of Technology,              
    Address, Postcode City, Country        \\
  \end{tabular}
  
   \begin{tabular}{c}
    $^c$ Institute of Mechanics,
    University of Technology,
    Address, Postcode City, Country            \\
  \end{tabular}
  
\end{center}

$^*$ Corresponding author. Tel.: +0-000-000-0000 ; E-mail address: author@mail.xxx  \\


\hrule

%------------------------------------------------------------
% abstract
\section*{ABSTRACT}
The paper should be formatted according to the conference style guidelines presented in this template. The title of the paper should be typed in 16pt bold font and centered. It should be separated from the author names by 14pt space. Author names should be typed in bold font, in addition, the name of the presenting author should be underlined. It should be separated from the affiliations by 16pt space. Affiliations should be typed in general formatting style, centered within a corresponding bounding box. The abstract part of the final paper should be formatted as one paragraph not longer than 300 words and it should fit to the title page. The abstract begins with the "ABSTRACT" header typed in bold 10pt font. The abstract text should be separated from the header by 10pt space. Title, affiliations and abstract have to fit to the title page.


\textit{Keywords} : Type your keywords here, separated by semicolons, no more than 6 and no less than 4.

\hrule

%------------------------------------------------------------
% introduction
\section{INTRODUCTION}
All text should be written in the Times New Roman font. General text should be justified and divided into logical paragraphs separated by 10pt spaces. Single line spaces are required. All section headers except abstract and references header should be numbered using Arabic numbers without a trailing dot. The headers are separated from the last preceding paragraph by 24pt space and the following text by 10pt space. Top level headers should be typed in capital characters. Subsections should be numbered using multilevel numbering. A maximum of two sublevels is allowed. Subheaders should be typed in normal word case. A font size of 10pt should be used if not specified otherwise. The subsection headers are separated from the the last preceding paragraph by 12pt space and the following text by 6pt space.

Here put a nomenclature if necessary, in a box with the same font size as the rest of the paper. 

\begin{tabular}{|p{14.5cm}|}
\hline

\textbf{Nomenclature}\\
A         radius of... \\
B         position of... \\
C         further nomenclature continues down the page inside the text box.
 \\
\hline
\end{tabular}

%------------------------------------------------------------
% general instructions
\section{GENERAL INSTRUCTIONS}
The paper must be written in English. The top page margin should be 18mm, others 30mm. The paper used should have the size 210 x 297mm which is the European A4 size. It is suggested to use styles for formatting, automatic reference and figure numbering to avoid editorial errors. To avoid compatibility problems it is advised to use only the Latin alphabet and underscore character in the file name.

\subsection{Equations}
Equations must be numbered continuously using right flushed Arabic
numbers in brackets as shown in Equation~(\ref{eq:equ1})
\begin{equation} \label{eq:equ1}
  \bm{M}^i \cdot \dot{\bm{z}}^i_{II} = \bm{h}^i_a =
  \bm{h}^i_{\omega} + \bm{h}^i_e + \bm{h}^i_g + \bm{h}^i_p + \bm{h}^i_d
  .
\end{equation}
All symbols of the equation should be explained.

\subsection{Figures and tables}
Figures and graphs must be included using the same style as shown in Figure~\ref{fig:fig1}. The contents of the Figure should be explained in its caption.

\begin{figure}[ht]
  \begin{center}
    \includegraphics[height=66mm]{figure}
    \caption{Abstract representation of a multibody system with its most significant components: bodies, joints and forces elements (example of a figure and its caption)}
    \label{fig:fig1}
  \end{center}
\end{figure}

A resolution of 300dpi for pictures and 600dpi for line art is
suggested, 1px wide lines in figures should be avoided as they may become invisible in print. There is no limit on the amount of figures as long as the total length of the paper is within the specified limit. Figures should be centered on the page.

Tables must be included using the same style as shown in
Table~\ref{tab:tab1}. The contents of the table should be explained in
its header. Tables should be centered.

\begin{table}[ht]
  \begin{center}
    \caption{Example of a table.}
    \vspace{1mm}
    \begin{tabular}{*{4}{|c}|}
      \hline
      T11 & T12 & T13 & T14 \\
      \hline
      T21 & T22 & T23 & T24 \\
      \hline
    \end{tabular}
    \label{tab:tab1}
  \end{center}
\end{table}


\subsection{References}
References should be sorted in alphabetical order as shown below,
where \cite{Bauchau11} exemplifies the case of a textbook, while
\cite{SeifriedSchiehlen07} is an article in conference proceedings and
\cite{MikkolaShabana03} is an article in a journal.


%------------------------------------------------------------
\section{SUBMISSION OF THE PAPER}

Authors are requested to upload their article no later than January 31, 2024, via the Microsoft CMT platform. First, go to the Microsoft CMT website and create your account : (https://cmt3.research.microsoft.com/CME2024/Submission/Index). Then, search for the CME2024 conference using your CMT account. Finally, access CME2024 as an author and create a new submission. The uploaded file must be in the PDF format. When creating the PDF, please make sure to use A4 as paper size.

After successful submission the author will receive a submission confirmation email within 24h. Before submitting your paper, please make sure that it is according to the conference style guidelines presented in this template.

\section{CONCLUSIONS}
We are looking forward to meeting you at the conference in Bordj El-Bahri.


%------------------------------------------------------------
% biliography
\begin{thebibliography}{aber}

\bibitem[1]{Bauchau11}
  Bauchau, O.A.: Flexible Multibody Dynamics.
  \newblock Dordrecht: Springer, 2011.

\bibitem[2]{MikkolaShabana03}
  Mikkola, A.M.; Shabana, A.A.: {A Non-Incremental Finite Element Procedure for
    the Analysis of Large Deformation of Plates and Shells in Mechanical System
    Applications}.
  \newblock Multibody System Dynamics, Vol.~9, No.~3, pp.~283--309, 2003.

\bibitem[3]{SeifriedSchiehlen07}
  Seifried, R.; Schiehlen, W.: Computational Analysis and Experimental
  Investigation of Impacts in Multibody Systems.
  \newblock In P.~Eberhard (Ed.) IUTAM Symposium on Multiscale Problems in
  Multibody System Contacts, pp.~269--280, Springer, 2007.

\end{thebibliography}

\end{document}
